VFS1220-5D-01/SMC直動式電磁閥
Note 1) ANR indicates the flow rate con
verted to the value at 20°C under the atmospheric pressure
and the state of relative humidity 65%.
Note 2) Based on discharge rate and
discharge temperature (70°C) of screw type compressors
Outlet air temperature can be calculated with
inlet air temperature, ambient temperature and
amount of air in the following procedure.
注1）是標準狀態(tài)(ANR)［20℃大氣壓、相對濕度65%］時的處理空氣量。
注2）表示換算成空氣壓縮機吸入狀態(tài)[32℃大氣壓］時的處理空氣量。
注3）額定規(guī)格以外按型號選定方法（P.3、P.4)選定型號。
注4）電源電壓的指定參見型號表示方法（P.９)。
注5）漏電保護器另購，感度電流30mA。
(Example) Inlet air temperature: 100°C, Ambient
temperature: 20°C, Amount of air: 2000
l/min (ANR), Air pressure: 0.7 MPa, Model:
Outlet Air Temperature at Above Conditions
Use outlet air temperature of 38.5°C from
outlet air temperature table. At this time correction
factor line becomes .
To get correction factor of 1.35 use ambient
temperature correction factor at 20°C.
To get outlet air temperature divide 38.5°C
from (1) by 1.35 from (2).
Outlet temperature = 38.5 ÷ 1.35 = 28.5°C

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發(fā)送信息!
2.如有必要,請您留下您的詳細聯系方式!